|
| 形狀 | SMD |
|---|---|
| 尺寸代碼(單位為mm) | 1608 |
| 長度 | 1.6mm |
| 長度公差 | ±0.15mm |
| 寬度 | 0.8mm |
| 寬度公差 | ±0.15mm |
| 厚度 | 0.8mm |
| 厚度公差 | ±0.15mm |
| 阻抗(at 100MHz) | 120Ω |
| 阻抗(at 100MHz)公差 | ±25% |
| 阻抗(at 1GHz) | 145Ω |
| 阻抗(at 1GHz)公差 | (Typ.) |
| 額定電流(at 85℃) | 2A |
| 額定電流(at 125℃) | 1A |
| 直流電阻(max) | 0.04Ω |
| 工作溫度范圍 | -55℃ to 125℃ |
| 質量(標準值) | 0.005g |
| 電路數目 | 1 |
特點
BLM18H/BLM18E series has a modified internal electrode
structure, that minimizes stray capacitance and
increases the effective frequency range.
Features (BLM18H series)
1. BLM18H series realizes high impedance at 1GHz and
is suitable for noise suppression from 500MHz to
GHz range. The impedance value of HG/HD-type is
about three times as large as that of A/B-type at
1GHz, though the impedance characteristic of
HG/HD-type is similar to A/B-type at 100MHz or less.
2. HG-type is effective in noise suppression in wide
frequency range (several MHz to several GHz).
HB/HD-type for high-speed signal line provides a
sharper roll-off after the cut-off frequency.
HK-type for digital interface and HE-type for
optical pickup modules are effective in suppressing
the ringing because resistance especially grows in
the lower frequency.
3. The magnetic shielded structure minimizes crosstalk.
Features (BLM18E series)
1. Low DC Resistance and a large Rated Current are
suitable for noise suppression of the driver
circuit.
2. Excellent direct current characteristics
3. Thin type (t=0.5mm) is suitable for small and low
profile equipment such as DSC, cellular phones.
用途
| 其他用途 |
For general |
|---|
包裝信息
| 包裝 | 規格 | 超小訂購單位 |
|---|---|---|
D | 180mm紙帶 | 4000 |
J | 330mm紙帶 | 10000 |
B | 散裝袋 | 1000 |
